one, if you use three, after five years if a wear can be used elsewhere, local remedy, namely in the local place to put on the coat, the method is very simple, the wear gently sanding to remove dirt on the surface, and then with a dry soft cloth gently wipe clean, recoating coating. Or stick in the local place with polyester film.
Two, for the cork flooring with surface brushing, it is maintained as solid wood flooring, usually half a year with floor wax. The cork flooring with resin wear-resistant layer is as simple as the nursing of the composite floor.
Three, prevent heat damage. Avoid using high-temperature products such as hot-water cups directly on the floor, so as not to burn the surface paint. At the same time, we should try to avoid direct sunlight to the floor for a long time, so as to prevent premature drying and cracking of the paint film after long-term exposure to ultraviolet radiation.
Four, when the floor is installed for 24 hours, you can put furniture on the floor and minimize the movement of personnel on the floor within 24 hours. When you are away from home, please close the window and door, especially the faucet, so as to avoid rain and dripping the floor.
Five, cork floor maintenance is more convenient than another wood floor, during use, it is best to avoid the sand into the interior, some sand into, also can not wear the floor. Because the sand was brought in after being pressed into the foot of elastic layer, when the feet away, and will be ejected.
Of course, here to remind. Not too dirty too much into the sand, it will still produce flow wear, therefore, into the indoor sand should be promptly removed, generally do not need to be equipped with a vacuum cleaner, do not worry about the moisture will warp, mildew and other phenomena.
没有评论:
发表评论